| Function | Common | High function (timer) | Connecting 2 internal sensors |
| 2 input 1 output | 2 input 2 output |
| Model | HPAN-C7 | HPAN-CT7 | HPAN-C7W |
| Power supply voltage | 100 - 240 V a.c (50/60 Hz) ±10 % |
| Power consumption | About 5 VA |
| Power for sensor | 12 d.c (± 10 % ), 200 mA Max. |
| Input | | [H]level 4 - 30 V d.c, [L] level 0 - 2 V d.c | | Pull up/ Pull down resistance connection (4.7kΩ) by NPN/PNP switch setting | | Inversion function of NORM INV input signal | |
Control
Output | Contact | OUT | OUT1, OUT2 |
| NO contact : 250 V a.c 3A resistance load, NC contact 250 V a.c 2A resistance load, | | Rated load lifetime : above 100 thousand times. | |
None
Contact | O.C OUT | - |
| NPN open collector MAX 30 V d.c, 100 mA | | *ISOLATION (isolated with inner circuit) | |
| Output Response speed | Relay contact : approximately 10 ms |
| NPN open collector : less than 5 µs | - |
| Operation mode | IN, ES AND function operation | | IN, ES AND function operation | | AND trigger function operation | | - |
| Timer function | - | | 3 types of timer set up mode | | (ON DELAY, OFF DELAY, | | ONE SHORT DELAY) | | time set up function(min - max) | | - |
| Ambient temp. humidity | -10 ~ 55 °C, 35 ~ 85% R.H. (Freezing, dew not allowed) |
| Max noise | Square wave noise due to noise simulator (1 µs pulse per 16 ns) /
±2 kV (insert into power input terminal) |
| Dielectric strength | 1 minute within 1500 V a.c, 60 Hz |
| Insulation resistance | 10MΩ (500 V d.c mega between the power and the output) |
| Max Vibration | 10 ~ 55 Hz double amplituded 0.75 mm X · Y · Z 2 hour for each direction(when power turned OFF) |
| Max Impaction | 100 m/s2 (approximately 10 G), X · Y · Z 2 hour for each direction(when power turned OFF) |
| Weight | approximately 160g |